Protect your 1.5" SMRs from dust, debris, and damage with this SMR container. It has an embedded magnet in the base to hold your SMR in place while putting on and taking off the container's lid. (Price does not include SMR)
Size: 2in x 2in x 2in
Price: $25.00
Protect your 1.5" SMRs from dust, debris, and damage with this SMR container. The magnet is not embedded in the base of the container when printed using higher temperature filaments such as polycarbonate. The container printed in polycarbonate is much stronger than when printed in other filaments such as PLA. (Price does not include SMR)
Size: 2in x 2in x 2in
Price: $35.00
.jpg)
This radio base was designed to be used on a desktop and to securely hold a radio, spare antenna, spare battery, and a wireless mic. This product has been tested to fit Motorola R5, R7 and XPR3300 radios and the associated stubby and slim whip antennas.
Size: 4.75in x 4.25in x 1in
Price: $10.00
This cap set was designed to protect the threaded end of a Motorola Portable Radio Antenna and the antenna port on the radio itself. It has been tested to fit the Motorola stubby antenna and the slim whip antenna. One pack comes with five sets of caps (five each).
Size: 0.25in x 0.25in x 0.25in
Price: $10.00
.jpg)
This radio base can be used vertically on a wall or horizontally on a desk to securely hold three Motorola Radios. This product has been tested to fit Motorola R7 and XPR3300 radios but should fit the other models in these product lines. Also, this system was designed to work with the Motorola Radio Antenna Base and can be attached using included magnets to each other to form a single unit or can be glued for a permanent hold.
Size: 8.5in x 3.25in x 2in
Price: $20.00
.jpg)
This radio antenna base can be used vertically on a wall or horizontally on a desk to securely hold six Motorola Antennas. This product has been tested to fit Motorola R7 and XPR3300 stubby and slim whip antennas. Also, this system was designed to work with the Motorola Radio Base and can be attached using included magnets to each other to form a single unit.
Size: 8.5in x 1.25in x 1.375in
Price: $10.00
.jpg)
This radio base system can be used vertically on a wall or horizontally on a desk to securely hold six Motorola Radios and six Motorola Antenna. The base unit has been tested with Motorola R7 and XPR3300 radios. The antenna base has been tested with Motorola stubby and slim whip antennas. Magnets allow you to customize your system.
Size: 8.5in x 7.75in x 2in
Price: $50.00
This thread adapter goes from 1/4" at 20 TPI to 5/8" 11 TPI. Notch at one end for easy installation using a flat-head screwdriver.
Size: 0.625in x 0.625in x 0.45in
Price: $5.00
This thread adapter goes from 3/8" at 16 TPI to 5/8" 11 TPI. Notch at one end for easy installation using a flat-head screwdriver.
Size: 0.625in x 0.625in x 0.45in
Price: $5.00
Protect your 1.5" SMRs from dust, debris, and damage with this SMR container. It has an embedded magnet in the base to hold your SMR in place while putting on and taking off the container's lid. (Price does not include SMR)
Size: 2in x 2in x 2in
Price: $25.00
Protect your 1.5" SMRs from dust, debris, and damage with this SMR container. The magnet is not embedded in the base of the container when printed using higher temperature filaments such as polycarbonate. The container printed in polycarbonate is much stronger than when printed in other filaments such as PLA. (Price does not include SMR)
Size: 2in x 2in x 2in
Price: $35.00
This radio base was designed to be used on a desktop and to securely hold a radio, spare antenna, spare battery, and a wireless mic. This product has been tested to fit Motorola R5, R7 and XPR3300 radios and the associated stubby and slim whip antennas.
Size: 4.75in x 4.25in x 1in
Price: $10.00
This cap set was designed to protect the threaded end of a Motorola Portable Radio Antenna and the antenna port on the radio itself. It has been tested to fit the Motorola stubby antenna and the slim whip antenna. One pack comes with five sets of caps (five each).
Size: 0.25in x 0.25in x 0.25in
Price: $10.00
This radio base can be used vertically on a wall or horizontally on a desk to securely hold three Motorola Radios. This product has been tested to fit Motorola R7 and XPR3300 radios but should fit the other models in these product lines. Also, this system was designed to work with the Motorola Radio Antenna Base and can be attached using included magnets to each other to form a single unit or can be glued for a permanent hold.
Size: 8.5in x 3.25in x 2in
Price: $20.00
This radio antenna base can be used vertically on a wall or horizontally on a desk to securely hold six Motorola Antennas. This product has been tested to fit Motorola R7 and XPR3300 stubby and slim whip antennas. Also, this system was designed to work with the Motorola Radio Base and can be attached using included magnets to each other to form a single unit.
Size: 8.5in x 1.25in x 1.375in
Price: $10.00
This radio base system can be used vertically on a wall or horizontally on a desk to securely hold six Motorola Radios and six Motorola Antenna. The base unit has been tested with Motorola R7 and XPR3300 radios. The antenna base has been tested with Motorola stubby and slim whip antennas. Magnets allow you to customize your system.
Size: 8.5in x 7.75in x 2in
Price: $50.00
This thread adapter goes from 1/4" at 20 TPI to 5/8" 11 TPI. Notch at one end for easy installation using a flat-head screwdriver.
Size: 0.625in x 0.625in x 0.45in
Price: $5.00
This thread adapter goes from 3/8" at 16 TPI to 5/8" 11 TPI. Notch at one end for easy installation using a flat-head screwdriver.
Size: 0.625in x 0.625in x 0.45in
Price: $5.00
High-quality Polycarbonate filament in a translucent black color. PC filament has exceptional thermal resistance, excellent mechanical properties, high impact strength and durability, and is suitable for engineering purposes. (Extra charges may apply)
High-quality PLA filament in a green color. Perfect for detailed and durable prints.
High-quality PLA filament in a bright green color. Perfect for detailed and durable prints.
High-quality PLA filament in a light gray color. Perfect for detailed and durable prints.
High-quality PLA filament in a bright magenta color. Perfect for detailed and durable prints.
High-quality PLA filament in a bright orange color. Perfect for detailed and durable prints.
High-quality PLA filament in a gradient from mint to lime green. Perfect for detailed and durable prints.
High-quality PLA filament in a gradient from pink to grapefruit. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark green color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark orange color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark yellow color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte charcoal color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte dark blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte dark brown color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte ice blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte white color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte latte brown color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte lemon yellow color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte lilac purple color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte mandarin orange color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte sakura pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte red color. Perfect for detailed and durable prints.
High-quality PLA filament in a metalic iron gray color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny blue and teal color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny gold and pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny blue and red color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny blue and pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny black and red color. Perfect for detailed and durable prints.
High-quality PETG filament in a translucent light blue color. Perfect for detailed and durable prints.
High-quality Polycarbonate filament in a translucent black color. PC filament has exceptional thermal resistance, excellent mechanical properties, high impact strength and durability, and is suitable for engineering purposes. (Extra charges may apply)
High-quality PLA filament in a green color. Perfect for detailed and durable prints.
High-quality PLA filament in a bright green color. Perfect for detailed and durable prints.
High-quality PLA filament in a light gray color. Perfect for detailed and durable prints.
High-quality PLA filament in a bright magenta color. Perfect for detailed and durable prints.
High-quality PLA filament in a bright orange color. Perfect for detailed and durable prints.
High-quality PLA filament in a gradient from mint to lime green. Perfect for detailed and durable prints.
High-quality PLA filament in a gradient from pink to grapefruit. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark green color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark orange color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a glow in the dark yellow color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte charcoal color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte dark blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte dark brown color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte ice blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte white color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte latte brown color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte lemon yellow color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte lilac purple color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte mandarin orange color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte blue color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte sakura pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a matte red color. Perfect for detailed and durable prints.
High-quality PLA filament in a metalic iron gray color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny blue and teal color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny gold and pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny blue and red color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny blue and pink color. Perfect for detailed and durable prints.
High-quality PLA filament in a shiny black and red color. Perfect for detailed and durable prints.
High-quality PETG filament in a translucent light blue color. Perfect for detailed and durable prints.